Anycubic I3 MEGA Stampante FMD 3D Telaio in Metallo

- BIANCO E NERO US SPINA 212977903

6 Avviso inviato
  • SPEDIZIONE GRATUITA Tempo di spedizione stimato: giorni lavorativi Il tempo di elaborazione dell'ordine può richiedere alcuni giorni. Una volta spedito dal magazzino, il tempo di spedizione (o consegna) dipende dal metodo di spedizione.
  • +
  • Senza Interessi Puoi goderti un massimo di 0 rate senza interessi, e potresti non godere di questa offerta quando effettui ordini con altri prodotti
;   
Informazioni fiscali Protezione del prezzo Disclaimer sul prezzo
Svendita

LUSJi

4.7/5.0
  • 5 stelle 75%
  • 4 stelle 21%
  • 3 stelle 3%
  • 2 stelle 0%
  • 1 stelle 1%

Prodotti consigliati per te

I clienti che hanno acquistato questo prodotto hanno acquistato anche

Nota:
● Si prega di leggere e seguire attentamente il manuale dell'utente prima di assemblare o utilizzare la stampante 3D.
● La modifica e la personalizzazione della stampante 3D sono severamente vietate. Non ci assumeremo alcuna responsabilità per eventuali problemi derivanti da modifiche.
● Utilizzare sempre la tensione CA corretta per la propria regione.
● Si prega di non posizionare la stampante 3D vicino a materiali infiammabili / combustibili o fonti di calore.
● Utilizzare la stampante 3D solo in aree adeguatamente ventilate. Mantenere una distanza di sicurezza dalla stampante.


Anycubic I3 MEGA Stampante FMD 3D Telaio in Metallo  

Caratteristiche principali:
● Assemblaggio estremamente semplice, prestazione stabilI
● Nessun bisogno del firmware e debug, stampe semplici dopo l'assemblaggio
● Tutto il telaio è in metallo così da avere una struttura rigida e più longeva 
● Doppi assi Z, doppi drive, prestazioni più potenti
● L'Installazione del motore a vite è più conveniente, eccellenza del motore a vite trapezoidale in parallelo, rende gli errori meno frequenti, maggiore precisione, facile da installare
● I chip dei driver dek motore ha una precisione di 1,8 gradi e sono indipendenti, sequenzialità degli step garantita
● Un Interruttore di alimentazione, prototipo firmware open source, un fusibile di scorta incorporato 
● Più di 1 kg di materiali PLA / ABS / HIPS di legno  in più rispetto a quello nero
● Il design indipendente della scheda madre, completamente compatibile con la scheda di fissione RAMPS, installazione  più conveniente e prestazioni più stabili

Specificazione

Generale

Marca: Anycubic
Tipo di Sciarba: Fai da te
Modello: I3 MEGA
Area Incisione: 210 x 210 x 205 mm
quantità ugello: singolo
diametro ugello: 0.4 millimetri
temperatura dell'ugello: Temperatura ambiente a 260 gradi
spessore dello strato: 0.05-0.3mm
Scheda di memoria in linea di stampa: scheda SD
schermo a cristalli liquidi: sì
velocità di stampa: 20 - 100mm / s
temperatura di Piattaforma: temperatura ambiente a 100 gradi
materiale di supporto: ABS,FIANCHI,PLA,Legno
diametro materiale: 1.75 millimetri
Formato del file: AMF,DAE,G-code,OBJ,STL
XY precisione di posizionamento: 0.01 millimetri
Voltaggio: 110V / 220V
Host software per computer: Cura
Tipo di imballaggio: imballaggio non assemblato

Dimensioni e Peso

Peso di Prodotto: 14,5000 kg
Peso di Pacchetto: 14,6000 kg
Taglia del prodotto: 41,00 x 40,50 x 45,30 cm / 16,14 x 15,94 x 17,83 pollici
formato del pacchetto: 56,00 x 52,00 x 27,00 cm / 22,05 x 20,47 x 10,63 pollici

Contenuto Confezione

Contenuto imballaggio: 1 x Anycubic I3 Mega 3D Stampante, 1 x SD Lettore di Scheda, 1 x Supporto, 8 x M5 Vite, 1 x Corredo di Strumenti, 1 x Raschietto, 1 x Pinze, 1 x Corredo di Hot End, 1 x Guanto, 1 x Pinze, 1 x 8G SD Scheda, 1 x 1kg Filamento, 1 x USB Cavo, 1 x Cavo di Potenza

Anycubic I3 MEGA Stampante FMD 3D Telaio in Metallo- White and Black US PlugAnycubic I3 MEGA Stampante FMD 3D Telaio in Metallo- White and Black US PlugAnycubic I3 MEGA Stampante FMD 3D Telaio in Metallo- White and Black US PlugAnycubic I3 MEGA Stampante FMD 3D Telaio in Metallo- White and Black US PlugAnycubic I3 MEGA Stampante FMD 3D Telaio in Metallo- White and Black US PlugAnycubic I3 MEGA Stampante FMD 3D Telaio in Metallo- White and Black US Plug

Probabilmente ti piace

Domande e risposte dei clienti

  • Tutti
  • Informazioni sul prodotto
  • Stato delle scorte
  • Pagamento
  • A proposito di spedizione
  • Altri

0 Domande & Risposte Visualizza tutto>

Prodotti sponsorizzati relativi a questo articolo

Recensioni dei clienti

4.67 su 5
  • 61
  • 20
  • 2
  • 0
  • 1
  • Dirk
    great printer "out of the box"
    Absolute fantastic 3D printer, 8 screws, 3 connectors, 4 screws for bed leveling and you are done. Very easy to build up. 1st printer that is almost printable out of the box. the 1st print was the pair of oils that are on the SD card. Perfect print. I build up 3 different china 3D printer before, all had bin kits and I needed 5 to 6 hours to build up and a lot of tweaking and add ones to print. the Anycubic i3 Mega is a perfect fast stetting up printer that owns the "print out of the box" status. In the package is a lot of useful tools , like screwdrivers etc, a 2nd complete spare Hotend, a spare switch with mounting option for the endstops. You also find 1 kg of PLA in the box. My 1st personal print with 8,5 h over night was also absolute great. I would say price fits for the good quality you get. Perfect printer for people that starts with the 3D printing hobby and do not like to learn the hard way how to build a 3D Printer. Also great printer for everybody how wants to print out of the box. Next Tests will be, ABS, Wood and flex filament, but maybe the flex could be a bit difficult, because its not a direct extruder (the extruder is mounted on the frame and not above the hotend).
    Suggerimento
    I haven`t found anything negative so far. May the y-axis the the hotbed drives on 2 linear rods, thats great, but in the left side is 1 linear ball-bearing and on the right side are 2, why not 2 on both sides?

    Sep 05,2017 11:46:57

    Questa recensione è stata utile?

  • Roberto
    It could have been better
    nothing to say about shipping and packaging (gearbest ok +++++), but the problem was in the printer, arrived with wiring not well connected and more serious with the nozzle with the decentralized hole, thank goodness that there was a hot end of replacement from where I then took the nozzle, 10 days later I left the power supply, I managed to restart it by changing the fan but after a few days it stopped altogether.I wrote to Anycubic that has a nice support group, and within 15 days a nice new power supply came from China.despite the initial problems are 3 months that I print without problems, the quality is excellent, I knew it was a very good printer, but I was surprised by the details of incredible details (we are talking about a € 300 printer), you have no problems adhesion because the ultrabase plate is excellentwould I recommend it? of course.
    Suggerimento
    nothing to say about shipping and packaging (gearbest ok +++++), but the problem was in the printer, arrived with wiring not well connected and more serious with the nozzle with the decentralized hole, thank goodness that there was a hot end of replacement from where I then took the nozzle, 10 days later I left the power supply, I managed to restart it by changing the fan but after a few days it stopped altogether.I wrote to Anycubic that has a nice support group, and within 15 days a nice new power supply came from China.despite the initial problems are 3 months that I print without problems, the quality is excellent, I knew it was a very good printer, but I was surprised by the details of incredible details (we are talking about a € 300 printer), you have no problems adhesion because the ultrabase plate is excellentwould I recommend it? of course.

    Jun 12,2018 20:12:55

    Questa recensione è stata utile?

  • DH
    Awesome!
    It took 15 mins to assemble, level and have my first print underway. The components are also very good quality and the overall assembly is very neat, the thing is built like a tank so is incredibly sturdy. No failed prints so far and they've all come out looking great. The version shipped to me was the ultrabase version (composite heat bed) so did not come with bed leveling sensor nor the bed leveling features in the software. However, manual leveling was very straightforward and i've only had to do this once so far. Bed adhesion is amazing! i've not had to use any glue sticks etc so worth the trade in bed level sensor in my opnion. Its also by far the quietest printer i've ever owned! the printer also comes with filament sensor, a spare hot end, metal spatula, tools and 1 Kg roll of filament.
    Suggerimento
    Ermmm... its heavy, better have a strong desk to put it on!

    Aug 21,2017 16:09:02

    Questa recensione è stata utile?

  • Toremmont
    Imprimante 3d
    C'est ma première expérience chez Gearbest et ma première imprimantre 3D. La reception a été rapide et sans problème, le produit trés bien emballé.Le montage rapide et sans difficulté, en moins d'une heure je lançais ma première impression (fichier fournit dans la carte mémoire). La prise en main a donc été très rapide,. La carcasse de l'imprimamnte est entièrement en acier, les guides et vis de guidages semblent de bonnes factures. des pièces de rechanges et les outils nécessaires sont compris dans le poackage, ainsi qu'une bobine de 1kg de PLA. Je n'ai pas encore utilisé l'imprimante en connexion USB (pas indispensable) et ne peut donc pas me prononcer sur ce sujet. Je n'ai pas non plus essayé les fonction de reprises après coupure.Trés satisfait de mon achat et des premières expériences d'impression.

    Sep 18,2018 13:14:25

    Questa recensione è stata utile?

  • stefan
    easy start, high quality outcome
    * Easy to assemble and operate (with some technical background, of cause)* Very solid construction causes good quality prints.* Started the first print 60 minutes after my doorbell rang, well I prepared myself by some videos on the internet* The manual is in English. There are lots of pictures. It is very helpful and explains everything* Everything needed (really everything, including tools) is included in the delivered box (which has a size, and a weight!)* Never had a single broken print with the included black PLA filament. All printing parameters are written in the manual.* Less than 10 percent broken prints with Verbatim ABS, probably due to temperature variations in my room (sunshine).
    Suggerimento
    * Bed levelling is tricky, but not to complicated* Looks like the bed is not completely flat, this does no harm in my case.* The filament spool holder looks good but has a rather thin axis with no bearings. It works, but there are millions of constructions for spool holders on the internet.

    Apr 30,2018 16:41:58

    Questa recensione è stata utile?

  • HDS1
    Vraiment Génial. Je recommande
    Vraiment Génial je recommande. Packaging vraiment soigné avec tous les outils nécessaires et une bobine PLA noir. La structure de l\'imprimante est vraiment rigide ce qui permet à la fois d\'éviter des vibrations ou de petits déréglages. Le nivellement du plateau est vraiment simple et précis! (contrairement à l\'Anet A8). Très bonne qualité d\'impression dès la première impression. Possibilité de changer les températures et vitesses d\'impression au cours de l\'impression très pratique! Bref pour une utilisation régulière ou de longue impressions je recommande vivement!
    Suggerimento
    Livraison un peu lente (commandée le 24Dec reçu le 10Janvier) mais prévue. L'adaptateur de la prise d'alimentation bouge beaucoup mais avec un coup de scotch fonctionne très bien.

    Jan 11,2018 10:04:20

    Questa recensione è stata utile?

  • OldCodger
    Amazing little machine. (International version.)
    After six months of ownership, I can honestly say that this incredible little thing works better, quicker, and more intelligently than my daughter's Neato machine which was over twice the price. It was also nearly £100 cheaper than a Dyson vacuum that you have to push around yourself. What an outdated idea...I've just ordered a second one for my cleaning lady to take home. She deserves the rest. :o)Spare parts, including replacement motors, are available cheaply online.The latest firmware updates have brought the much requested "zoned cleaning" mode.It's my new best friend. ;o)
    Suggerimento
    I only wish I had found out about these things sooner.There are no cons, in my opinion. Buy one, be amazed.

    Jul 10,2018 16:01:59

    Questa recensione è stata utile?

  • Philip
    mr
    -Excellent quality and sturdy metal frame.-Only have to screw 8 screws to setup printer, 99% pre assembled already for you.-User manual teaches you everything you need to know (even Cura settings etc)-Comes with 1kg filament (not like some other printers where you only get 3 or 5 meters)This is a excellent printer and probably one of the best bang for buck printers you can buy, this is my 3rd printer and i must say this is definitely one of my better ones so far! definitely recommend to others to buy
    Suggerimento
    none so far

    Sep 20,2017 07:44:21

    Questa recensione è stata utile?

  • William Wagner
    owner
    Great printer working good, although the nozzle was clogged up Gear Best sent a new nozzle. The printer was easy to set up just as advertised. simply level the bed and your go to go. Prints are great they come out really good. Shipping was a little slow but that is expected from China. I chose this printer because of the fast setup, build other printer took almost 2 days to get running. I have printed PLA ABS and PETG with no problem. The print bed it fantastic simply let the print cool and then pop off the print, no prying or hard to get off. Would buy again from Gear Best
    Suggerimento
    none

    Apr 16,2018 14:22:36

    Questa recensione è stata utile?

  • Seyfullah GOKOGLU
    Yeni başlayanlar için ideal bir yazıcı
    - Hızlı ve kolay kurumu ile yeni başlayanlar için ideal bir yazıcıdır.- Baskı doğruluğu ve eksen kalibrasyonları çok iyi. Kurulumdan sonra hızlı ve doğru bir şekilde baskı alınabiliyor.- Metal şasesi ile dayanıklılık artırılmış.- Taşıma sırasında kalibrasyon kolay kolay bozulmuyor.- PowerLoss özelliği sayesinde elektrikler kesilse bile baskıya kaldığı yerden devam edebiliyor.- Filament sensörü sayesinde filament bittiğinde baskı bekliyor ve filamenti değiştirip baskıya devam edebiliyorsunuz.- Dokunmatik LCD ekran kullanım kolaylığı sağlıyor.- Paketleme oldukça iyi yapılmış.
    Suggerimento
    - Isıtıcı tabla ABS baskısı için yeterince ısınmıyor. Tabla sıcaklığı 96 derecenin üzerine çıkmıyor.- Otomatik bed seviye fonksiyonu da olsa çok daha güzel olurdu. Yazıcının bir önceki modeli bu açıdan daha iyiydi.

    Jul 04,2018 20:45:45

    Questa recensione è stata utile?

gli articoli visualizzati recentemente

Vedi consigli personalizzati

Nuovo cliente? Comincià qui